BlueSolar PWM-Light 12/24V-5A

€30,00

Product Code: BLUEMCJB67

Manufacturer: Victron

Solar controller BlueSolar PWM light 12/24v 5a

The Solar Controller BlueSolar PWM Light 12/24v 5a It offers a function of disconnection of the output of charge by low voltage of the battery, with a control of backlight and a single timer. The controller BlueSolar has A two-digit, seven-segment display for quick and easy adjustment of the load output function, including the timer setting.

With three-stage battery charge (initial, absorption and flotation), non-programmable. The  Solar Controller BlueSolar PWM Light 12/24v 5a It has a protected load output against overload and short circuits. Protected against reverse polarity of solar panels and/or battery.

BlueSolar 12/24-PWM

Three models: 5 A, 10 A or 20 A at 12 V or 24 V

• Low-cost PWM controller.
• Internal temperature Sensor.
• Charging of the three-stage batteries (initial, absorption and flotation).
• Overcurrent protection.
• Short-circuit protected.
• Protected against reverse polarity of solar panels and/or battery.
• Disconnection of the charge output by low voltage.
• Optional remote display (20a models only).

Load controller Victron BlueSolar PWM Light 10a 12/24v

Features

  • disconnection function of the low-voltage charge output of the battery.
  • Backlight control function, single-timer.
  • Two-digit and seven-segment display for quick and easy adjustment of the charging output function, including the timer setting.
  • Charging of three-stage batteries (initial, absorption and flotation), non-programmable.
  • Charge output protected against overload and short circuits.
  • Protected against reverse polarity of solar panels and/or battery.

Blue Solar PWM-Light 12/24-10a

  • 12/24v battery voltage with automatic input voltage detection
  • Rated charging current 10 A
  • Automatic disconnection of the load Yes
  • Maximum Solar voltage 28 V/55 V (1)
  • Self-consumption < 10 MA
  • Charging output manual Control + low voltage shutdown
  • Reverse Battery polarity protection (fuse) overtemperature output short Circuit
  • Overload protection
    • Disconnection after 60 s in case of reaching 130% of load
    • Disconnection after 5 s in case of reaching 160% of load
    • Immediate disconnection in case of short circuit
  • Common positive grounding
  • Temp range. Working-20 to + 50 °c (full load)
  • Humidity (non-condensing) max. 95%

Battery

  • "Absorption" load voltage 14.2 V/28,4 V
  • "Flotation" load voltage 13.8 V/27,6 V
  • Disconnection of load by low tensión11, 2 V/22.4 V
  • Low-voltage charging reconnection
    • 12.6 V/25.2 V (manual)
    • 13.1 V/26.2 V (Automatic)

Housing

  • Protection class IP20
  • Terminal size 5 mm ²/AWG10
  • Weight 0.15 kg
  • Dimensions (Al x W x D) 70 x 133 x 33.5 mm (2.8 x 5.3 x 1.3 inches)

Standards

  • Safety IEC 62109-1
  • EMC at 61000-6-1, en 61000-6-3, ISO 7637-2

1) Use 36-cell solar panels for 12v. Using 72-cell solar panels for 24 V or 2 of 36 cells in serially connected

2) The controller switches to the float voltage level 2 hours after reaching the absorption voltage whenever the battery voltage drops below 13 V, a new charge cycle starts.

Data Sheet 


Prism Solar SL uses cookies. For more detailed information about these cookies please see our privacy policy. Please accept to continue or block all non-essential cookies.

I accept cookies from this site.