Inverter Cables Packs

Prism Solar Offers a selection of Inverter-Charger Battery Cables for our DIY Customers. Fabricating Cables correctly requires special hydraulic crimping equipment, to ensure correctly applied lugs . All our 25mm2 , 35mm2 and 50mm2 cables are fitted with .zinc coated cooper lugs and hydraulically pressed to 12 tons. They are sealed in colour matched heat shrink. Lug fittings are available in 6mm 8mm and 10mm diameter stud holes. We use Eland Flex PVC coated cable in red and black sheath . This is a important  as it has a visual reminder always of positive and negative cable to avoid costly polarity errors during construction and maintainance. Most inverter-chargers are destroyed in reverse polarity is applied. 

The packs are supplied as either 2 cable, 3 cable or 4 cable packs.

2 Pack consists of 1 x Red Positive Lead 1 x Black Negative. Used when no negative shunt is fitted and no lug fitting is required for the positive breaker. ie hole and grub screw compression fitting . Or when no +ve DC is fitted (not reccomended) The 2 packs are popular with the Midnite OB E Panels as they supply the two smaller +ve,-ve cables as standard.

3 Pack Shunt is for when a  2 x Black (-ve) cables  to accomodate a shunt and  1 x +ve Red Cable and no lug fitting is required for the positive breaker. ie hole and grub screw compression fitting . Or when no +ve DC is fitted (not reccomended) The lengths of the black cable can be stipulated when ordering. The red +ve cable can simply be cut stripped and fixed to the hole and grub screw fixing of your breaker

4 Pack Shunt/Breaker is for when a  2 x Black (-ve) cables  to accomodate a shunt and  2 x  +ve Red Cables used when the Dc breaker has lug fittingsThe lengths of the black and red cables can be stipulated when ordering. Providing they dont alter the overall length of the pack length.

Please note that our 500amp 50mv shunt sold with and with out our battery monitor kits require a 10mm bolt hole fixing on each -ve cable and this is the standard size fitted to our 3 Pack and 4 Pack Inverter-Charger Cables for the shunt. Battery and Inverter terminal sizes can be stipulated when ordering. between 8mm and 10mm . With 6mm and 12 mm special order

 

No products found.