Solar Kit Lithium-ion Pylontech 9kWh 5000W 19800Whdia

€9,100,00 €7,900,00

Product Code: SOLALCV985

Free shipping in Spain !

Entrega gratuita en España!

Lithium Solar Kit Pylontech 9kWh 5000W 19800Whdia

Energy captured in a day: 11880 Wh / day in winter and 27720 Wh / day in summer.

Common uses that the Pylontech Lithium Solar Kit 9kWh 5000W 19800Whdia can cover. The production estimate has been taken with a minimum of 3 hours of peak sun for winter, while in summer, 7 hours of sunshine have been taken.

 

1 x Refrigerator A +++

1 x Freezer chest A +++

1 x Flat TV 75W for 8h / day

2 x Laptops for 6h / day

1 x Dishwasher 3 times a week

1 x Microwave

8 x Led lights 10W for 4h / day

1 x Washing machine 3 times a week (with cold water)

1 x Ceramic hob for 1h / day

1 x Oven for 3 hours a week

1 x 1200W dryer: 3 times a week

1 x Well pump 1CV maximum 1h / day

1 x Air Conditioning Inverter 5h a day in summer (solar hours)

1 x Fan 6h / day in summer

Consumption in stand-by inverter up to 5000W

 

Solar Kit Components Lithium Pylontech 9kWh 5000W 19800Whdia

12x Solar Panel 330W to 24V Polycrystalline Bauer: It is the most powerful panels in the 24V range, the most used for medium and large size installations in field huts, homes and industrial buildings, used for both isolated systems and networked . It consists of 72 cells of polycrystalline silicon, thanks to which it has a fantastic price with first class features. The solar panel of 330W 24V Bauer offers the best performance of the range of solar panels of 24V and 72 cells, reaching a maximum current of 8.7A at 37.95V, a breakthrough compared to its predecessors of 300W or 320W. They incorporate 100cm of 4mm section cable with an MC4 connector at the end of each pole for easy connection

Axpert VM III 48V 5000VA MPPT 500V 80A Off-Grid Inverter The Voltronic VMIII offers a very useful solution for isolated photovoltaic systems, since it allows integrating all the components of the system in a single device, which It also incorporates an LCD screen that will allow you to see the charge and voltage status of the batteries, the real-time charging amps of the solar panels, and the consumption output, as well as having a small drawing on the same screen that will allow you to see How is the energy flowing through the system, since it also supports a generator or external support network that we can have in the solar installation. The inverter is pure wave sinusoidal, the battery charger has a maximum load of 60A with automatic activation contact AGS an MPPT load regulator of 80A to be able to connect up to a maximum of 5000W of solar power. The invertor's guarantee is for 2 years. 

Battery Lithium Pylontech 48V 2,4kWh4x Battery Lithium Pylontech 48V 2,4kWh: This lithium battery of 48V is a great option given its wide compatibility with many investors in the market. With a 48V voltage, the Pylontech rack range is available in 2.4kWh unit modules that can be connected in parallel to achieve more capacity. These models give us an added advantage to our isolated or self-consumption installation, its great durability and no maintenance are a guarantee of quality. The useful energy stored is up to 2.2kWh per battery module because thanks to lithium technology it is possible to work with common discharges of 80% of the total capacity, offering many years of life and a higher number of cycles compared to the batteries of lead.

Structure Solar panels metal cover Structure on metal roof or inclined roof: The structure on metal roof or for inclined surface is perfect for the occasions in which the roof of the installation site has an optimal orientation and inclination. It can be of metal surface, a sandwich panel or concrete surface, since this structure basically consists of stringers to place the panels. The structure that we include for this solar kit includes all the necessary hardware for the assembly of the solar panels to it, except for what is necessary for the anchoring of the structure itself to the roof or floor, since it will be a function of this surface. The structure has a very simple assembly manual. If you need another type of structure in your kit, contact us so that we can budget and change depending on your needs. See technical sheet.

Solar Radox Cable of 4mm2 and 20 meters of Black Cable  The 4mm2 cable is used in the solar installations between the panels to make the parallels in the delivier of current or to carry the energy of the same up to the charge regulator. It is very important not to exceed the energy limitations that the cable can support, since a section lower than what our system needs could have an overheating due to the current currents that are handled. This cable supports high operating voltages so it is perfect for connecting series in grid connection systems or with hybrid inverters. 

 

15 meters of Red Cable 16mm2 and 15 meters of Black Cable  16mm2 The cable of 16mm2 is used in solar installations that have a considerable amount of power. They serve to carry the energy from the power distributor to the charge regulator or from it to the batteries. It is very important not to exceed the energy limitations that the cable can support, since a section lower than what our system needs could have an overheating due to the current currents that are handled. This cable supports high operating voltages and a higher current intensity than the 10mm cable, making it perfect for interconnecting charge regulators and batteries or for high distances, to prevent a large voltage drop.  PowerFlex 16mm2 cable is from the Top Cable brand; It has a double coating made of halogen-free rubber with a high resistance to chemical agents, oils, ultraviolet rays and supports immersion in water. The Powerflex  cable is a class 5 flexible cable prepared for low voltage up to 1000V. Its conductor is tin plated electrolytic copper, and thanks to the design of its materials, it can be installed in all kinds of environmental conditions: wet and dry areas, outdoor installation, buried, and even submerged in water (AD8), without affecting the useful life

 

 1 Meter of Black Cable Flexible 70mm2 The 70mm2 cable is used in solar installations as a power cable between the battery and the inverter. This type of cables is used because the current that flows through it can be very high between the batteries and the inverter, causing overheating if a cable with insufficient section is used. The cable of 50mm2 is of the Top Cable brand, and although it is normally distributed with a length of 1 meter, since the distance between batteries and inverter should not be high, larger distances can be requested. The cable has a moderate flexibility and is designed to meet the most demanding requirements. The cable should normally be crimped with proper metric terminals depending on the inverter hardware and batteries. Thanks to the design of its materials, it can be installed in all kinds of environmental conditions, both in wet and dry areas, without damaging the

 

1x Distributor and watertight box for panel connection: To make the parallels of the panels in a simple, reliable and expandable, we attach the 2-pole splitter and its sealed box where we will install it. It should be placed as close as possible to the group of solar panels in order to join the wiring of all of them in a single pair of positive and negative cables. In this way we can make a drop of only one cable per pole to the charge regulator (this down cable will be larger than the one installed between the solar panels and the power distributor, since it will pass through the sum of the all photovoltaic modules, it is very useful because it allows to make clean installations with a saving of important wiring.

 

4x MC4 Connectors Panels. They are a type of connector compatible with the terminal that is already included in the solar panel. A metallic rod is inserted into the male and female MC4 terminals inside the plastic body of the connector. It is necessary to peel a piece of cable equivalent to 1 cm and crimp it to the metal sheet. It is inserted inside the body of the connector until we hear a click. At this time we will know that the connector has been properly installed because if we pull the cable slightly it will no longer exit.

 

1x Pylontech Gtlan Rack Cabinet: Firm structure that allows the correct attachment, connection and location of the modules of the Pylontech US2000B Plus 2.4V 2.4kWh batteries. This rack cabinet has slots that facilitate the proper ventilation of the batteries installed inside and wheels or legs to move the system if necessary or keep it fixed wherever you want.

 

2x Tray for rack cabinet: It is a support that will allow us to place it inside the cabinet to be able to support the battery that we install inside it. One of these trays is already included in the cabinet itself, and also another battery can be supported on the chassis itself, that's why the kit includes two trays less than battery units has the system. Of great resistance, they support a weight greater than 50Kg and are fastened to the cabinet by their sides. The hardware and anchors are not included, since they are supplied together with the cabinet itself.


Prism Solar SL uses cookies. For more detailed information about these cookies please see our privacy policy. Please accept to continue or block all non-essential cookies.

I accept cookies from this site.